Strict Standards: Declaration of ProductDetails::getAll() should be compatible with model::getAll($orderby = '', $limit = '') in /home/alizehra/public_html/models/productdetails.php on line 0

Strict Standards: Declaration of Products::getAll() should be compatible with model::getAll($orderby = '', $limit = '') in /home/alizehra/public_html/models/products.php on line 0

Strict Standards: Declaration of Categories::getAll() should be compatible with model::getAll($orderby = '', $limit = '') in /home/alizehra/public_html/models/categories.php on line 0
Welcome to - Ali Zehra International
 
New Brochure
SMSN (pdf)
S.S.Fasteners (pdf)
S.S.Fastners
Valves
Fittings
Pneumatic Air
Tubes
Flow Control Valve
Cylinders
Cam lock Couplings
Flow Meter
Hoses and tubes
Hydraulic accesories
Hydraulic Pipe Clamps
Hose clips
Seals
Hydraulic Mini Mess
HP Water Cleaning Gun
Temperature Gauges
Water Filter
Coolant Pipe

High Pressure Flexible Hydraculic House

We have the highest quality of hydraulic hoses that are available in the Indian market. We have special hoses up to 10,000 PSI We have stock of hydraulic hoses in roll form from 15 meters to 100 meters depending on size and type.

We use Leak proof End-Connections for the hydraulic hoses at our own facility.

Our End-Connections are made in Carbon Steel, Mild Steel, Stainless Steel 304 & 316 and in Brass

EN 854 R3
Application Medium pressure hydraulic oils, air and water
Construction ___________
Tube Synthetic oil resistant rubber
Reinforcement 2 textile braids
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +120 degrees C
EN 856 4SH
Application Very High pressure hydraulic
Construction ___________
Tube Oil resistant Synthetic rubber
Reinforcement 4 high tensile steel wire spirals
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +100 degrees C continuous +125 degrees C
Impulse Cycles Minimum 400,000
Size ¾”ID to 2”ID
SAE 100 R2AT
Application High pressure hydraulic oils, air and water
Construction ___________
Tube Synthetic oil resistant rubber
Reinforcement 2 high tensile steel wire braids
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +120 degrees C
Impulse Cycles 200,000
Size ¼” ID to 4 “ID
EN 854 R6
Application Low pressure hydraulic oils, air and water
Construction ___________
Tube Synthetic oil resistant rubber
Reinforcement 1 textile braids
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +120 degrees C
EN 856 4SP
Application Very High pressure hydraulic
Construction ___________
Tube Oil resistant Synthetic rubber
Reinforcement 4 high tensile steel wire spirals
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +100 degrees C continuous +125 degrees C
Impulse Cycles Minimum 400,000
Size 3/8”ID to 2”ID
Hydraulic High pressure hoses SAE 100 R1AT
Application High pressure hydraulic oils, air and water
Construction ___________
Tube Synthetic oil resistant rubber
Reinforcement 1 high tensile steel wire braids
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +120 degrees C
Impulse Cycles 150,000
Super Jack Hose 1000 PSI Working Pressure
Application Hydraulic jack application used in jacking systems
Construction ___________
Tube Synthetic oil resistant rubber
Reinforcement 2 high tensile steel wire braids
Cover Synthetic rubber – abrasion, ozone and weather resistant
Temperature Range _40 degrees C to +120 degrees C

KEC Lion Hoses

We have hose for various applications. Cement Hoses Suction Hoses Duct Hoses Brewery Hoses Sand Blasting Hoses Water Delivery Hose To ISS-444 Steam Rubber Hose Delivery Hose Oil Suction Hose TO BSS-1435 Oil Discharge Hose To BSS-1435 The Sizes range from ½”ID to12” ID depending on the type of hose. Please ask us for details

Stainless Steel Flexible Bellows

* Unbraided Working Pressure given in table are one quarter of the pressure value, which will cause the hose to elongate and take a permanent set.

** Bursting Pressure apply to both Close and Normal pitch with Stainless steel braid, bursting pressure are given rather than working pressure to allow each Engineer to determine his own safety factor. The above table is to be considered only as a general guide, due to the commercial variation of tube gauges and manufacturing limitations.

Table Will come here

Teflon Hoses

WHY TEFLON FLEXIBLE HOSE?

Teflon hose when reinforced with wire braid, offers a flexible hose construction which is unmatched by any other hose. There are only two classes of chemicals know to attack Teflon – the molten alkali metals such as sodium and potassium and the fluorochemicals such as chlorine trifluoride, oxygen difluoride and fluorine gas. Teflon keeps its flexibility at low temperatures and its chemical structure and strength are unaffected by high fluid or ambient temperature. The hose is rated at – 100 Degrees F to + 500 degrees F (-73 degrees C to + 260 degrees C) continuous through the full pressure range. A particular strength is its ability to handle alternate 350 degree F and cold-water service. Teflon has outstanding non-stick qualities. While tacky materials may show some adhesion almost all substances release easily. This “cleanability” means batch purity when using the same hose for handling different materials. Low coefficient of friction yields low-pressure drop. Flow rates continue high for the life of the hose. Deposits don’t build up. The coefficient of friction of Teflon is generally in the range of 0.05 to 0.02. Telfon is oleo phobic and hydrophobic. Teflon hose absorbs no moisture making it ideal for pneumatic systems where dew point must be kept low. Water absorption is less than 0.01% by A.S.T.M. test. Teflon imparts no taste or color to materials conveyed. Teflon hose will stand up under severe conditions of the continuous flexing and vibration without failure from flexural fatigue. A variety of hose constructions are available to meet varying flex, impulse and pressure requirements. The properties of Teflon hose do not change with age. Its “shelf – life is unlimited. It is dependable under all climatic conditions.

Construction

Smooth inner core of extruded Teflon TFE (polytetra – fluoroethylene) utilizing the most advance DuPont resins, offering the greatest resistance ever to temperature cycling problems and kinking. HF 115 hose has a natural white PTFE inner core: HF 101 hose has a precisely controlled amount of carbon black added to inner 15% of the inner core wall to provide a relatively low resistance path of electrostatic charges to the metal end fittings Wire braid reinforcement is Type 304 stainless steel. Two layers of braid is designated by the letter “T”.

Advantages of Flowflex hoses made from Teflon

  • REDUCED MAINTENANCE COSTS

  • LESS PRODUCTION DOWN –TIME

  • SIMPLIFIED AND REDUCED INVENTORIES

  • SAFETY

  • GREATER FLEXIBILITY OF DESING

  • VARIOUS FITTING OPTIONS

Low Pressure Flexible Hoses

Low-pressure flexible hoses are of high-grade neoprene rubber and a mild steel wire braiding on the out end of the pipe. Available from 1/8”BSP to 2”BSP threads. We also have the same hose with the option of a stainless steel braiding.

Application Air, Oil, Water
Pressure Up to 21kg/cm2 depending on size.

Seamless Tubes

We provide the best quality of seamless tubes. Our seamless tubes can come in a plated (zinc, cadmium, nickel) form as well as in standard form as per our customers needs.
We have sizes from 3mm to 63.5 mm ex-stock with us.
Hi-Line Flare less Bite Type fittings are designed for use with pipes specified by their Outside Diameter or Nominal Bores and of the materials described below. In all cases, these pipes must.

  • Be of seamless construction
  • Have precision tolerance on their Outside Diameter
  • Have a blemish- free surface
  • Be in a fully annealed condition with hardness not exceeding RB70

In certain medium and low-pressure applications, Cold-drawn ERW pipes of nominal bores are also suitable. Pipe wall thickness recommendations. The minimum wall thickness specified in various standards of seamless pipes are based on the nominal working pressure, and are given below for the popular types. The fittings featured on our web site will be applicable to pipes of relevant standards on an equivalent basis Seamless tube standard chart

Table Will come here

M.S and Copper Coils

M.S Coil formed tubes.

M.S. coiled formed tubes are mainly used in low pressure oil applications and for ammonia applications. We have a high grade of coils available with us which are zinc, copper or nickel plated.

Copper tubes

Copper tubes are used for our brass and hydraulic fittings where the application of M.S tubes is restricted.Applications are mainly Air, Oil, water and gases.We have a large variety of copper tubes in coiled or straight lengths available in various gauges.



All Rights Reserved, Copyrights - 2011. Ali Zehra International

Site Designed & Developed by 123pl.in